Question 1
A mold designer is selecting a parting line for a new injection molded component. Which consideration should drive the initial decision?
Show answer & explanation
Correct answer: A - Direction of pull and clean mold separation
10 exam-style questions with answers and explanations, straight from our 1,030-question bank. Tap an answer to check yourself. When you're ready, take the scored version in the free practice test.
These 10 free CSWAP-MM questions are organized by exam domain, so you can see how each part of the Certified SOLIDWORKS Advanced Professional Mold Making blueprint is tested. Reveal the answer and explanation under each question.
A mold designer is selecting a parting line for a new injection molded component. Which consideration should drive the initial decision?
Correct answer: A - Direction of pull and clean mold separation
Draft analysis highlights several faces as unsuitable for the intended pull direction. What is the most likely issue?
Correct answer: A - The pull direction is incorrect or the faces lack adequate draft
A component contains a recessed feature that cannot release with a straight mold opening. Which solution is appropriate?
Correct answer: A - Create a side core
A mold shows uneven cooling across the cavity. Which design review area should be prioritized?
Correct answer: A - Cooling channel layout and heat removal
A cavity region is not filling consistently during molding review. Which area should be examined first?
Correct answer: A - Runner and sprue flow path
A polymer part is expected to shrink during cooling. Why is a scale factor greater than 1.000 applied to tooling geometry?
Correct answer: A - To enlarge the cavity to compensate for shrinkage
An opening through the molded part would allow plastic leakage during injection. Which feature addresses this condition?
Correct answer: A - Shut-off surface
Automatic shut-off creation fails on complex openings. What is the best next action?
Correct answer: A - Manually create or modify shut-off surfaces
A designer needs to combine separate surface bodies into a continuous surface. Which operation is used?
Correct answer: A - Knit Surface
Which surfacing operation creates a surface extending in a defined direction from an existing edge or face?
Correct answer: A - Extend Surface
The CSWAP-MM exam also covers these domains. Drill them in the full free practice test:
The full bank has 1,020 more CSWAP-MM questions with explanations.
Continue in the free practice test →
View plans